TECO Pressing Fan Blade for Aquarium Chillers – 230/28°, TK 2 and TK 4

This TECO pressing fan is a five-blade aluminium fan blade that mounts on the chiller’s fan motor and pushes air through the condenser. The figures in the name give the blade diameter in millimetres and its 28° pitch, so the right blade keeps airflow, noise and cooling performance as the chiller was designed. Replace a bent, cracked or unbalanced blade with the original part for your model.

Key features of the TECO Pressing Fan Blade

• Genuine TECO spare
• Five aluminium blades
• 28° blade pitch
• Moves air over condenser
• Model-specific fit

Choosing the right blade

Pick the blade by chiller model: the 230 mm, 28° blade fits TECO TK 2 and TK 4 chillers, while the 200 mm, 28° blade is for the smaller TK 1. If unsure of your model, check the rating label on the chiller before ordering. Signs that a blade needs replacing include new rattling or vibration, bent or cracked blades and weaker airflow through the condenser. Clean dust from the condenser grille at the same time to help the new blade work well.

Good to know

Switch off and unplug the chiller before fitting any spare part, check the part matches your model, and have the work done by a qualified technician if you are unsure.

TECO Pressing Fan Blade specifications

• Brand: TECO
• Brand website: tecous.com
• Product: TECO Pressing Fan Blade for Aquarium Chillers – 230/28°, TK 2 and TK 4
• Size/pitch and fit: 230/28°, TK 2 and TK 4
• Blade diameter / pitch: 230 mm / 28°
• Fits: TECO TK 2 and TK 4 chillers
• Category: Fish Heating & Lighting